Learning to love cars
I wasn’t raised to love cars. I
was raised to deal with them when they broke down. We were always troubleshooting
or looking for a breaker bar to free a stuck nut. Calling auto-parts stores,
asking if they had a solenoid in stock. One hassle after another. But I never
wanted anything more than my own car.
I started saving up when I was 11
so that I could buy something decent that wouldn’t stain the driveway. Two
weeks before my 16th birthday, I bought a decade-old Chrysler New
Yorker for $1500. I loved that car. It meant that I could do whatever I wanted,
whenever I wanted. My goal was to never again ask anyone for a ride.
But cars will turn on you. The
New Yorker developed a leak. I had to add half a quart of trans fluid every
week, which was easy and cheap enough, but the Chrysler must have been losing
oil, too. When my brother Bob borrowed it so he could go see a concert, the car
threw a rod and never made it home. My heart broke.
I took the keys to Bob’s beat-up,
black 1978 Thunderbird, which was far from roadworthy. The seats didn’t adjust,
so I sat on pillows. The steering was so far out of alignment that I had to
steer—hard—just to go straight. It did have an eight-track player, so I picked
up Black Sabbath at the thrift store. I had fun, fun, fun, until I got T-boned.
Bob didn’t even ask about the car. He only wanted to know if I was OK. The
T-bird was still drivable, but the passenger door was dented in, meaning that everyone
had to climb in through the driver’s door, which was about 17 feet long. Later,
the power steering pump went, and the T-bird got towed to a junkyard. Worse, I
was back to calling my mom for a ride.
Cars give you independence, and
they can take it away. In my family, these were the times we rallied together,
driving each other to work, school, or the parts store, finding tools on the
messy garage floor, loaning each other money and sometimes our cars. My mom and
I would take turns sitting behind the wheel, waiting to turn the key whenever
my dad or brothers would ask. I can still see my mom’s face, when she sat
there, wishing for the car to start, sharing in my brothers’ disappointment if
it didn’t.
After the T-bird, I bought a cheap
Caprice, which died, then a Cordoba with horrible suspension and a mismatched
door. It was a fine car, until it stopped going in reverse.
I bought a little Sunbird, which suffered
a timing-belt catastrophe the summer after I graduated from college. I turned the
car over to my apprentice-mechanic brother Ken, who said he would get around to
fixing it eventually. I commandeered my mom’s minivan, and then my brother’s
S-10, which was how I learned to drive a stick.
About 10 years ago, I was on the freeway
when the alternator went out on my Buick Regal. I had the car towed to my
parents’ house because it was closer and they had tools. The next afternoon,
before I even woke up, my mom had replaced the alternator and returned my old
one for the core deposit. Would your mom do that for you?
My brother Ken became one of the
best GM dealership technicians. For years, I was lucky enough to have him fix
my cars when he was off the clock. I’d give him money that in no way covered
all the favors he did for me.
I loved that Buick. I got the sense
that it would run forever but also knew that I should keep looking, just in
case. I drove by a Cadillac with a sign in the window every payday from October
to the end of December. It was pretty, big and blue.
I never thought I would like
anything better than my Buick, but the Cadillac grew on me. I drove it to reporting
assignments and on two-track roads in the U.P.
One day, the radiator drain cock
broke, spilling coolant all over my driveway. Within hours, my dad, brother
Billy, and I pulled the radiator out, replaced the $5 part, popped it back in, and I
was on the road.
Instead of feeling burdened each
time something went wrong, I realized how lucky I am.
Two years ago, I crashed the
Cadillac. I wasn’t ready to see it go. I wanted to put it together again, and that’s
what we did. My brother Ricky and I went to junkyards and bought the headlight,
hood, cornering-light assembly and grille. The hood was white. We sanded and
painted it the same Montana Blue as the rest of the Deville.
I could say I loved that car even
more because of the work I put into it, but the truth is it got knocked down a
peg. I started shopping for a new ride.
Originally, I wanted a Grand
Marquis, a Buick, or a Cadillac. I wanted something big, with four doors and
lots of metal because that’s what I’d grown used to. I ended up getting a Honda
Fit, my first brand-new car. It came with two years of free maintenance. For a
while, I thought that meant my brothers were off the hook. But just six weeks
after I bought it, the Honda suffered 119 dents in a hailstorm. The insurance
company cut me a check, and I called on my brother Adam. Among the skills he
picked up during his life on the road was paintless dent repair. I still needed
my team of repairmen.
All along, people kept telling me
that if I would just buy nice cars instead of those “hoopties,” then I wouldn’t
have had to put up with the hassles of being stranded, waiting for tow trucks, and
keeping a milk crate stocked with car fluids, tools, tape, zip ties, jumper
cables, rope, and other assorted supplies on hand at all times.
All of those car troubles didn’t
teach me to love cars, but they taught me to understand them and how to deal
with cars when they break down. I love where cars have taken me: concerts, the
beach, camping, shopping, school, and thousands of reporting assignments. I
loved taking long drives when gas was still cheap. And when my cars broke down,
I loved having my family there to help put them back on the road.
I met Brian Wilson
Meeting Brian Wilson was one of my lifelong goals.
On Friday, November 13, 2015, in New Buffalo, Michigan,
that dream came true.
WPHS rulz!
Why can't I buy a Playboy on campus?
College newspaper, 1998.
It was a question my editor threw at me from nowhere. My assignment for the next day's paper. Four hours later, I filed this report.
It contains the answer to his question, insight into bookstore management and purchasing decisions, the opinions of eight students from diverse backgrounds, comments from the off-campus competition, and the words "skin fix." All because we needed to fill a hole. (Ha ha.)
That daily scramble to get things done is what I remember about my college days. I also recall my professor pulling me into his office. This article was on his desk. "You had time to write all this, but you couldn't turn in the rough draft of your four-page paper." I thought, who has time for a rough draft? Give me a deadline, I won't let you down.
That daily scramble to get things done is what I remember about my college days. I also recall my professor pulling me into his office. This article was on his desk. "You had time to write all this, but you couldn't turn in the rough draft of your four-page paper." I thought, who has time for a rough draft? Give me a deadline, I won't let you down.
Custom Cures
After years of suffering, a female patient came to pharmacist Karen Raehtz for another opinion. Doctors had been treating her for Lyme disease, but the medication wasn’t helping.Raehtz came to a different conclusion. She devised a hormone replacement therapy that cleared up the woman’s symptoms.
“She feels better. She’s thinking clearly,” Raehtz says.
Such customized care is part of a growing trend aimed at making pharmacists, including pharmacy students, key front-line health care providers.
The field has evolved, according to pharmacy alumni and instructors at Wayne State University. Change is under way as pharmacists step out from behind the counter and inject themselves into patient health care.
“We see the pharmacist as being a major provider of public health information,” says Dr. David Edwards, chairman of pharmacy practice in the Eugene Applebaum College of Pharmacy and Health Sciences. Whether people want to learn more about a pill advertised on TV, an over-the-counter drug or herbal supplements, pharmacists are knowledgeable, trustworthy and approachable — and in most cases, patients don’t need an appointment.
“We consider ourselves as the most accessible health care profession. Pharmacists are there on every other corner,” Edwards says. “You can walk in and you can get health care advice.”
University Pharmacy, an independently owned business located on Wayne State University's campus, is a prime example. Maria Young opened University Pharmacy in 2007 after working for chain stores and in a hospital setting.
“I was unhappy in the dispensing role,” she says. “My vision was to step outside the prescriptions to a patient-centered model.”
Young counsels patients on lifestyle modifications and meal proportions, as well as how and when to take their medication so the body uses it properly. She meets with patients in a private consultation room, where they can discuss personal matters without fear of embarrassment for being overheard.
“We’re bringing it back to the old way of doing things by having face-to-face consultations,” she says, adding that the idea is to get patients more involved in their own care.
As the nation engages in a discussion about a health care overhaul, pharmacists see more opportunities to help. They point out that proper use of medication can lower health care costs and improve the quality of life. For example, a recent study published in the Journal of the American Pharmacists Association finds that when pharmacists and physicians collaborate on a diabetes patients’ care, the patients have an easier time controlling their blood sugar levels, saving up to $211 per month among those surveyed.
Ideally, pharmacists say, a 30- to 45-minute consultation at the outset of the patient-pharmacist relationship will help both parties. The pharmacist can get a sense of the patient’s medical history, and the patient has the opportunity to ask any questions and provide feedback.
Some patients find doctors intimidating. They don’t want to admit they can’t afford a medication, or that they have stopped taking it, which contributes to the problem.
Without knowing the whole picture, a physician may conclude one prescription is not working and prescribe something else. Pharmacists can work with patients to find the correct dosage of medicine and make sure it is being delivered in the right form (whether pill, a topical cream, liquid or suppository).
Pharmacists devote six years of study toward their degree and in return can expect excellent opportunities and above average job growth, according to the U.S. Bureau of Labor Statistics.
The American Pharmacists Association notes that this extensive training makes the pharmacist the most knowledgeable healthcare professional when it comes to medicines and their use.
Helping the public understand what pharmacists bring to the table is one of the challenges right now, pharmacists say. “We’re still trying to increase awareness,” says Jim Owen of the Washington D.C.-based American Pharmacists Association.
“Most people when they hear the term ‘pharmacist,’ they assume it’s a person counting pills.”
As prescription drug use escalates, so does demand for pharmacists.
More than 3.5 billion prescriptions were filled last year alone in the United States. A new Walgreens store opens every 18 hours. More than ever, drug companies also are marketing products directly to consumers — promising to cure an overactive bladder, or even helping to grow longer eyelashes.
While dispensing these medications still consumes more of a pharmacist’s time, opportunities abound for specialization within the field.
For someone tall and thin, like pharmacist Scott Popyk, buying clothes off the rack is not always an option.
A small percent of the population has the same problem with prescriptions — the medicine they need is not commercially available.
“I have to take my clothes to a tailor. That’s what we do with medicine,” says Popyk, who runs Health Dimensions Compounding Pharmacy in Farmington Hills.
Some people find they need a specific dose of medicine, which major drug manufacturers don’t offer. They may have trouble taking pills altogether and require a chewable medicine.
For these people, compounding is their only option. Pharmacists can create a medicine that is truly “just what the doctor ordered.”
Compounding involves mixing raw ingredients to prepare customized medications to meet each patient’s specific needs. Both the form (such as nasal spray, suppositories, oral rinses, creams or lozenges) and strength of medicine can be modified. The customization might be as basic as a flavoring to meet a child’s fickle palate.
“Sometimes you have to medicate creatively,” Popyk says.
Popyk’s career led him to open Health Dimensions in 1996.
There are only about 400 compounding pharmacies in the United States. Health Dimensions was one of the first in the Detroit area, and one of only 76 nationally that are accredited by the Pharmacy Compounding Accreditation Board. That ensures that the pharmacy subscribes to methodology, procedures and environmental controls that meet rigorous practice standards.
After spending nearly a decade working in a hospital pharmacy environment, Karen Raehtz desired a change of pace and philosophy.
Raehtz started looking for something more positive, and that led her to open a business, Physicians Compounding Pharmacy, in 2004.
“I saw a big shift in people taking care of themselves, beginning to challenge what doctors were saying,” she says.
Now, her focus is on functional medicine — working with doctors to discover and treat the root cause of medical issues rather than just the symptoms.
“We look at the whole picture. That’s where we need to be if we really want to make a difference,” Raehtz says.
This is an abridged version of an article published in the Spring 2010 issue of Wayne State magazine. It earned honorable mention honors in the Detroit chapter of the Society of Professional Journalists' annual contest. Click the link to read the entire article.
Fernon Feenstra
The name Fernon Feenstra was my first clue this would be a story I'd remember. I made my editor repeat it.
"I thought you'd say that," he said. "Fernon Feenstra."
Fernon was named our paper's First Citizen, a title that goes to someone who made a difference in the community.
It would never work as a lead, but it was funny.
"I thought you'd say that," he said. "Fernon Feenstra."
Fernon was named our paper's First Citizen, a title that goes to someone who made a difference in the community.
Fernon Feenstra was a delight in person. Sometimes you meet someone who has so many stories to tell, it's hard to know where to begin. He'd served in the Navy. He was a dean and one of the founders of the local college. He's the one neighbors call when they need a small electrical repair around the house. He'd been a politician. He orchestrated a community effort to honor those from Livonia who had been injured or killed in battle since the Civil War.
He was a leader, and people would do what he suggested. One time when a local hot dog factory had a quality control issue and could have gone out of business, costing people their jobs, Fernon Feenstra was behind a successful campaign to get people eating hot dogs again.
After spending a while with Fernon and hearing his stories, I was at a loss for my lead. Where should I begin? I really liked that hot dog bit, but his service to country and community was obviously more important. I talked about Fernon with my husband over dinner that night. "First of all, his name is Fernon Feenstra," I said. It was a fun name to say.
Then I retold his stories. My husband got a smile on his face, even before he finished his thought. He came up with this suggestion: "Fernon Feenstra: Fought for freedom, founded foundation for fallen fighters, forced folks to eat franks."
Then I retold his stories. My husband got a smile on his face, even before he finished his thought. He came up with this suggestion: "Fernon Feenstra: Fought for freedom, founded foundation for fallen fighters, forced folks to eat franks."
He's still Phil from Detroit
I had the pleasure of learning about Philip Levine and interviewing him for this article, which is one of my favorites I've written.
(Click the image to view a larger version of the article.)
Levine is a Pulitzer Prize-winning poet who graduated from my alma mater, Wayne State. I was nervous to interview and write about a Pulitzer winner, but he was down to earth and easy to talk to, which is why I liked the quote from fellow poet M.L. Liebler describing Levine: "He's still Phil from Detroit."
I spent long summer afternoons reading his books, smiling at his sardonic descriptions, picturing the Detroit he grew up in, appreciating poetry as a storytelling device. It was time well spent.
One that stuck with me is "Belle Isle, 1949." I found a clip of him reading it.
(Click the image to view a larger version of the article.)
Levine is a Pulitzer Prize-winning poet who graduated from my alma mater, Wayne State. I was nervous to interview and write about a Pulitzer winner, but he was down to earth and easy to talk to, which is why I liked the quote from fellow poet M.L. Liebler describing Levine: "He's still Phil from Detroit."
I spent long summer afternoons reading his books, smiling at his sardonic descriptions, picturing the Detroit he grew up in, appreciating poetry as a storytelling device. It was time well spent.
One that stuck with me is "Belle Isle, 1949." I found a clip of him reading it.
Reporter gets shock treatment
I let the police shoot me with a Taser gun, and boy, did it hurt.
It felt like someone slammed a spiked two-by-four into my back and then the ground around me got hit by lightning. Tiny fires of electric pain pulsed through my muscles. The little bit of control I had was dedicated to the mantra: "It's five seconds. Five seconds."
That's how long a Taser stun lasts. For some reason, back in 2004 I agreed to be shot by the newest weapon in the police department's arsenal. Afterall, I thought then, a good reporter does her research. Well, these days I would take someone else's word for it.
Back then, I figured: Five seconds of pain is nothing compared to growing up with eight brothers. I've had my hair catch on fire from wrestling near the stove. I've been stabbed by a tree. I thought for sure I'd lost the tip of my thumb during a door-slamming incident.
So, what's five seconds?
My head snapped back. The jolt lifted me to my tiptoes. My legs stiffened. My whole body was a funny bone.
By the time I got out an "ouch," it was over. (I swear I did not swear.)
(NOTE: To see slideshow, click on the black outline and then the small triangle at the bottom. Clicking the big triangle in the center will open a new window.)
Taser guns shoot two barbed probes the size of a fishhook into a suspect's skin or clothing. Coated steel wires, 21 feet long, carry the electrical charge. The shot overrides the body's central nervous system, stopping most targets in their tracks.
My back hurt for days following the attack, and it was unsettling to remember, but I got the story, along with a slideshow of images, thanks to photographer Trish O'Blenes. The cops bought me a beer afterward.
My brother Bob said, "Of all us boys, who would have thought Becky would be the first to get hit with a Taser?" They weren't angels, or strangers to the law growing up. I have finally taken a risk that my roof-diving, fight-starting, nose-breaking, machete-swinging-and-missing brothers -- who are known to break bones while recovering from broken bones -- have not.
But next time, I'll just take quotes from the sidelines.
It felt like someone slammed a spiked two-by-four into my back and then the ground around me got hit by lightning. Tiny fires of electric pain pulsed through my muscles. The little bit of control I had was dedicated to the mantra: "It's five seconds. Five seconds."
That's how long a Taser stun lasts. For some reason, back in 2004 I agreed to be shot by the newest weapon in the police department's arsenal. Afterall, I thought then, a good reporter does her research. Well, these days I would take someone else's word for it.
Back then, I figured: Five seconds of pain is nothing compared to growing up with eight brothers. I've had my hair catch on fire from wrestling near the stove. I've been stabbed by a tree. I thought for sure I'd lost the tip of my thumb during a door-slamming incident.
So, what's five seconds?
My head snapped back. The jolt lifted me to my tiptoes. My legs stiffened. My whole body was a funny bone.
By the time I got out an "ouch," it was over. (I swear I did not swear.)
(NOTE: To see slideshow, click on the black outline and then the small triangle at the bottom. Clicking the big triangle in the center will open a new window.)
Taser guns shoot two barbed probes the size of a fishhook into a suspect's skin or clothing. Coated steel wires, 21 feet long, carry the electrical charge. The shot overrides the body's central nervous system, stopping most targets in their tracks.
My back hurt for days following the attack, and it was unsettling to remember, but I got the story, along with a slideshow of images, thanks to photographer Trish O'Blenes. The cops bought me a beer afterward.
My brother Bob said, "Of all us boys, who would have thought Becky would be the first to get hit with a Taser?" They weren't angels, or strangers to the law growing up. I have finally taken a risk that my roof-diving, fight-starting, nose-breaking, machete-swinging-and-missing brothers -- who are known to break bones while recovering from broken bones -- have not.
But next time, I'll just take quotes from the sidelines.
Second chance
Article was published in the Observer & Eccentric Newspapers, Aug. 23, 2007
Joe North says he can run circles around most kids these days. At 53, he puts in 84 hours per week at his own pizza shop, Munchies Pizza on Middlebelt in Livonia.
"I feel good when I'm working," he said. "Everybody tells me it's too much work, but the doctors tell me to do what I enjoy doing."
The doctors North refers to are the ones monitoring his progress since his heart and double lung transplant, June 1, 1998. "I've been very lucky," the Westland resident said.
North suffered from emphysema and a weakening of the heart.
"I smoked. I worked in an injection molding plastics shop and I was a volunteer firefighter," he said. "It doesn't matter what I did, it was bad for me."
He got sick at age 37.
He spent four years in a wheelchair.
He had been on the transplant waiting list for one day shy of five years when the University of Michigan called to say they had the organs of an 18-year-old donor.
North, a father of four, still doesn't know anything about the person who gave him a second chance. His efforts to contact the donor's family were unsuccessful.
"They must have been some really great people, I'll tell you that," North said. "That's the ultimate gift."
(To read the rest of the article, click on the clipping above.)
Editor's note: It's no coincidence this is the second submission regarding a transplant recipient. I am the sister of two organ donors, and it has given me so much pleasure to meet people who have been given a second chance through organ donation.
Diaper Derby
Crawlers, take your marks ... Story and photos appeared in The Oakland Press.
Steven Chapman, 11 months, of Clawson races to his mom, Jackie Chapman, and sister, Madison, during a baby crawling race in Berkley. He won a box of Huggies.
Life after transplant
Beth Ann Dalrymple of Livonia was so sick she started planning her own funeral. But the grace of an organ donor gave Beth new life. She was able to achieve a lifelong dream of graduating from college. (Documentary; Produced on assignment at Oakland Community College)
Researchers propose changes to football helmet padding
Appeared in The Helios, a Wayne State University College of Engineering newsletter. Summer, 2002
Wayne State University Bioengineering researchers are proposing adjustments to the inside padding of football helmets that they believe will reduce the instances and severity of concussions on the playing field.
Dr. Liying Zhang, a researcher with the WSU Bioengineering Center in collaboration with Professors King H. Yang and Albert I King, has developed a brain model that will give helmet designers a much better idea on how much padding to use at different areas of the head. The human brain has different tolerance levels depending on the direction of the "hit" (tackle), say the researchers, and current helmet design does not consider this directional difference.
Despite new tackling rules and the mandatory use of helmets, there are still more than 100,000 football players in this country who sustain brain injuries every year ranging from mild concussions to death. Dr. Zhang began studying the problem in 1998 after the National Football League Charity approached the center with its concern about head injuries to NFL players, particularly quarterbacks sacked by very large defensive tackles.
To improve the helmet, Dr. Zhang needed to know the force levels at various locations the head can sustain without experiencing injury, as well as the thresholds necessary for serious long-lasting ones. To quantify these differences as well as other factors that cause concussion, Dr. Zhang performed studies using a three-dimensional finite element human head model -- an update of the previously developed Wayne State University Brain Injury Model. The computer model has all the essential anatomical features of a human head, and using it, researchers can calculate internal stress, strain and pressure at all locations, at any given instant during an impact.
Dr. Zhang studied directional sensitivity and calculated how a helmet reduces brain injury risk, then developed and validated a three-dimensional model of a football helmet.
Next, Dr. Zhang analyzed data of head-to-head collisions based on reconstruction of hits suffered by players in the actual game, which was well documented on high-speed video taken at NFL games. Dr. Zhang then applied the speed and direction of impact of all 12 cases involving 24 players to the human head model. The stress and strain levels were used to correlate concussion suffered by these players.
Ideally, for the helmet to be effective, it should absorb most of the force delivered to the head and distribute the remaining energy over a large area at lower force levels. The helmet padding (or lining) is designed to protect the head and to provide comfort at the same time.
To protect against side impacts (the most vulnerable kind), the helmet lining may need to offer more protection around the temporal regions, says Dr. Zhang. The brain model she developed will give helmet designers a much better idea on how much padding to use at all locations in the helmet.
Unfortunately, rotation of the head cannot be eliminated because football players need to be able to rotate their heads during the course of a game.
Dr. Zhang will continue her research to recommend further adjustments in padding thickness, taking into account comfort and practicality -- the material shouldn't weigh too much, and the padding shouldn't be too thick. Additionally, she is developing a new brain injury tolerance surface that will take into account both linear and rotational impacts.
Wayne State University Bioengineering researchers are proposing adjustments to the inside padding of football helmets that they believe will reduce the instances and severity of concussions on the playing field.
Dr. Liying Zhang, a researcher with the WSU Bioengineering Center in collaboration with Professors King H. Yang and Albert I King, has developed a brain model that will give helmet designers a much better idea on how much padding to use at different areas of the head. The human brain has different tolerance levels depending on the direction of the "hit" (tackle), say the researchers, and current helmet design does not consider this directional difference.
Despite new tackling rules and the mandatory use of helmets, there are still more than 100,000 football players in this country who sustain brain injuries every year ranging from mild concussions to death. Dr. Zhang began studying the problem in 1998 after the National Football League Charity approached the center with its concern about head injuries to NFL players, particularly quarterbacks sacked by very large defensive tackles.
To improve the helmet, Dr. Zhang needed to know the force levels at various locations the head can sustain without experiencing injury, as well as the thresholds necessary for serious long-lasting ones. To quantify these differences as well as other factors that cause concussion, Dr. Zhang performed studies using a three-dimensional finite element human head model -- an update of the previously developed Wayne State University Brain Injury Model. The computer model has all the essential anatomical features of a human head, and using it, researchers can calculate internal stress, strain and pressure at all locations, at any given instant during an impact.
Dr. Zhang studied directional sensitivity and calculated how a helmet reduces brain injury risk, then developed and validated a three-dimensional model of a football helmet.
Next, Dr. Zhang analyzed data of head-to-head collisions based on reconstruction of hits suffered by players in the actual game, which was well documented on high-speed video taken at NFL games. Dr. Zhang then applied the speed and direction of impact of all 12 cases involving 24 players to the human head model. The stress and strain levels were used to correlate concussion suffered by these players.
Ideally, for the helmet to be effective, it should absorb most of the force delivered to the head and distribute the remaining energy over a large area at lower force levels. The helmet padding (or lining) is designed to protect the head and to provide comfort at the same time.
To protect against side impacts (the most vulnerable kind), the helmet lining may need to offer more protection around the temporal regions, says Dr. Zhang. The brain model she developed will give helmet designers a much better idea on how much padding to use at all locations in the helmet.
Unfortunately, rotation of the head cannot be eliminated because football players need to be able to rotate their heads during the course of a game.
Dr. Zhang will continue her research to recommend further adjustments in padding thickness, taking into account comfort and practicality -- the material shouldn't weigh too much, and the padding shouldn't be too thick. Additionally, she is developing a new brain injury tolerance surface that will take into account both linear and rotational impacts.
WSU Students Help Develop Army Mobile Parts Hospital
Appeared in Exemplar, the Wayne State University Engineering alumni magazine, 2003
When a military vehicle breaks down on the battlefield, soldiers sometimes wait four days for the Army to track down and ship a new part from its inventory -- if the part still exists.
But soon, soldiers will be able to fabricate replacement parts on the spot through the use of a Mobile Parts Hospital (MPH), a Department of Defense initiative College of Engineering students helped develop through the Greenfield Coalition at Focus: HOPE.
Mobile Parts Hospital mini-manufacturing centers can reproduce or repair broken mechanical components for military vehicles, including trunks, tanks and helicopters -- in a matter of hours. The project has been under development since 1999 through the U.S. Army Tank-automotive and Armaments Command's National Automotive Center (NAC). Plans are to develop three to four units that would be battle ready by 2007, says Coryne Forest, a project manager at NAC.
The project uses the same thinking behind Mobile Army Surgical Hospitals. “M.A.S.H. units brought surgeons in close to the front lines. This is the same idea,” said Donald Falkenburg, director of the Greenfield Coalition.
The MPH comes in the form of 20-foot containers are packed with machinery, computers and satellite communications technology. The 27,000-pound containers are designed for transport by C-130 military aircraft, so the it can be deployed to remote locations. The containers are not armored, however, so they would likely be placed about 30 miles from the front lines, says Todd Richman, the MPH project manager at NAC.
Set-up takes about an hour. The units expand two feet to allow a technician to maneuver. Inside the module, the operator retrieves part information in the form of computer aided design via satellite from a growing database of more than 90,000 parts. Then, machines either cut and shape solid part stock to fit the digital mold or produce the part layer by layer by fusing metal powder in a process known as directed metal disposition.
If part data is unavailable, or, in the event of a communications failure, the MPH uses a 3-D laser scanner to glean geometric data and "reverse engineer" and build the part. Although the replacement parts are not the same quality as the original equipment manufacturers', they do the job, Forest says.
"The goal is to keep vehicles operating as long as possible in the field and keep the fighting forces fighting as long as they can," says Bruce O'Neill, program manager at Focus: HOPE’s Center for Advanced Technologies.
At the Center for Advanced Technologies, six manufacturing engineering degree candidates from the College of Engineering, the University of Detroit-Mercy and Lawrence Technological Institute had their hands in various elements of the project. The students were involved from a programmatic perspective, O'Neill says. They coordinated the equipment selection process, reviewed design specifications proposed by vendors, and ensured that those would fulfill the requirement.
Andre Reynolds, who received his bachelor's degree in Engineering Technology from Wayne State in 2001, helped develop the prototype 53-foot MPH demonstration trailer. The trailer is equipped with a vertical machining center, selective laser sintering system and communications center, which has video conferencing, satellite and cell phone data transfer capabilities.
"It was a very interesting project," Reynolds says. "It was a major learning curve." Reynolds spent about nine months working on the MPH project -- the longest of any of the candidates. He is now working for Ford Motor Company as a production supervisor.
The demo trailer is currently on the road touring the country for testing, trade shows and conferences.
It is not yet clear who will run the units -- whether it will be a soldier or Department of Defense civilian employee, Richman says. However, operators can learn to use the machinery even if they don't have an engineering background. Qualified personnel can coach operators via satellite from remote communications command centers, O’Neill said.
Mobile Parts Hospitals will also be linked to three Agile Manufacturing Centers located strategically throughout the United States. Those cells can manufacture parts that are too big to be produced in MPH modules or those not stored in the inventory database. Obsolete parts the government cannot get elsewhere can also be produced. The parts would then be transported to the point of need.
When a military vehicle breaks down on the battlefield, soldiers sometimes wait four days for the Army to track down and ship a new part from its inventory -- if the part still exists.
But soon, soldiers will be able to fabricate replacement parts on the spot through the use of a Mobile Parts Hospital (MPH), a Department of Defense initiative College of Engineering students helped develop through the Greenfield Coalition at Focus: HOPE.
Mobile Parts Hospital mini-manufacturing centers can reproduce or repair broken mechanical components for military vehicles, including trunks, tanks and helicopters -- in a matter of hours. The project has been under development since 1999 through the U.S. Army Tank-automotive and Armaments Command's National Automotive Center (NAC). Plans are to develop three to four units that would be battle ready by 2007, says Coryne Forest, a project manager at NAC.
The project uses the same thinking behind Mobile Army Surgical Hospitals. “M.A.S.H. units brought surgeons in close to the front lines. This is the same idea,” said Donald Falkenburg, director of the Greenfield Coalition.
The MPH comes in the form of 20-foot containers are packed with machinery, computers and satellite communications technology. The 27,000-pound containers are designed for transport by C-130 military aircraft, so the it can be deployed to remote locations. The containers are not armored, however, so they would likely be placed about 30 miles from the front lines, says Todd Richman, the MPH project manager at NAC.
Set-up takes about an hour. The units expand two feet to allow a technician to maneuver. Inside the module, the operator retrieves part information in the form of computer aided design via satellite from a growing database of more than 90,000 parts. Then, machines either cut and shape solid part stock to fit the digital mold or produce the part layer by layer by fusing metal powder in a process known as directed metal disposition.
If part data is unavailable, or, in the event of a communications failure, the MPH uses a 3-D laser scanner to glean geometric data and "reverse engineer" and build the part. Although the replacement parts are not the same quality as the original equipment manufacturers', they do the job, Forest says.
"The goal is to keep vehicles operating as long as possible in the field and keep the fighting forces fighting as long as they can," says Bruce O'Neill, program manager at Focus: HOPE’s Center for Advanced Technologies.
At the Center for Advanced Technologies, six manufacturing engineering degree candidates from the College of Engineering, the University of Detroit-Mercy and Lawrence Technological Institute had their hands in various elements of the project. The students were involved from a programmatic perspective, O'Neill says. They coordinated the equipment selection process, reviewed design specifications proposed by vendors, and ensured that those would fulfill the requirement.
Andre Reynolds, who received his bachelor's degree in Engineering Technology from Wayne State in 2001, helped develop the prototype 53-foot MPH demonstration trailer. The trailer is equipped with a vertical machining center, selective laser sintering system and communications center, which has video conferencing, satellite and cell phone data transfer capabilities.
"It was a very interesting project," Reynolds says. "It was a major learning curve." Reynolds spent about nine months working on the MPH project -- the longest of any of the candidates. He is now working for Ford Motor Company as a production supervisor.
The demo trailer is currently on the road touring the country for testing, trade shows and conferences.
It is not yet clear who will run the units -- whether it will be a soldier or Department of Defense civilian employee, Richman says. However, operators can learn to use the machinery even if they don't have an engineering background. Qualified personnel can coach operators via satellite from remote communications command centers, O’Neill said.
Mobile Parts Hospitals will also be linked to three Agile Manufacturing Centers located strategically throughout the United States. Those cells can manufacture parts that are too big to be produced in MPH modules or those not stored in the inventory database. Obsolete parts the government cannot get elsewhere can also be produced. The parts would then be transported to the point of need.
Bioengineering turns to human cell for answers
Appeared in Exemplar, the Wayne State University Engineering alumni magazine, 2002
After 60 years of crash tests and applying blunt force, researchers here are turning to the human cell for answers during the next phase in bioengineering research.
Having nearly completed mapping the human body's tolerance to severe impacts, the researchers are beginning to examine injuries at the cellular level to learn more about how cells are damaged.
"I'm envisioning the day when you can walk away from most car crashes," says Albert King, distinguished professor of Bioengineering, and director of the WSU Bioengineering Center, where research has contributed to the design of safety advancements in seat belts, air bags, interior padding and racing seats.
Severe auto accident victims now end up in the ER instead of the morgue. But in many cases, victims still suffer from debilitating closed head and neck injuries, as well as injuries to the lower limbs. Safety designs have eliminated many acute, but not functional injuries -- damaged limbs, and minor brain damage -- injuries that people can live with, but that affect their quality of life, Dr. King explains.
To gain understanding of functional injuries, Dr. King and WSU researchers plan to study the function of a cell as well as how it is affected and injured upon impact. Then, 10 to 20 years from now, doctors may be able to prevent and better treat injuries to reduce long-lasting effects, he says.
"We want to know how the cell's function is compromised by injury," says Dr. King. "We want to know how a cell is injured, why it dies, and how to make it survive."
The cell membrane controls a lot of the cell's function, including what enters and leaves the cell. Research of that scale requires expertise in the areas of molecular biology, biomechanics, physics, physiology, engineering and medicine. Wayne State investigators from across these disciplines are starting to work together at the Bioengineering Center to study impact bioengineering, and to suggest improvements in vehicle and airplane design, sports equipment and other applications.
The researchers want to analyze the forces that cause long-lasting or permanent damage to the brain. Along those same lines, researchers are also trying to determine where lingering pain comes from following a head and neck injury in a crash. These are the big questions that remain after years of impact injury research. The answers may lead to the reduction of further pain and suffering, not to mention billions of dollars in rehabilitation costs.
With severe impact injuries, secondary injuries, including brain damage, start to set in within hours or a few days of the accident, says C.P. Lee, distinguished professor of biochemistry at the WSU School of Medicine. The injury to the cells may cause changes to their biomedical processes and affect their basic metabolic functions, adds Dr. Lee, who collaborates with Bioengineering Center researchers. Currently, she is researching what goes wrong and how to stop the injury in its tracks before it causes permanent damage.
Once researchers pin down the problem, treating it could be as easy as administering antioxidants and calcium blockers through IVs in the emergency room, she says. Getting antioxidants and calcium blockers into the cells before oxidative stress causes too much damage may reduce the long-term effects of injuries.
"(The research) is very, very promising," Dr. Lee says. She explains that cell damage can be caused by oxidative stress brought on by an overload of calcium ions triggered by a severe impact. The overload can inhibit oxygen transfer within a cell. If the mitochondria, which produce energy in the cell, cannot transfer oxygen effectively, they cannot produce enough energy to maintain the brain or other organs.
Across all disciplines, researchers are working toward the same goal -- finding out how much stress a cell can take, whether the impact causes chemical, mechanical or physiological changes, Dr. King says. The WSU School of Medicine is currently studying programmed cell death, or apoptosis, to figure out how much a cell can take before it is injured so bad that it "commits suicide," Dr. King says. "All we want to know is what it is that causes a cell to go into apoptosis or necrosis, and how the mechanical force causes that to happen."
One way to study impact is to apply a known force or stress level to an individual cell, then analyze the impact on that cell and monitor its function after it has been stretched, Dr. King says. The technology to measure such small forces already exists. One type of sensor currently used in laboratories can measure forces in the order of piconewtons, a unit one-trillionth the size of a newton, the basic unit of force. That sensor measures the force a cell applies to a platform when it moves across the surface. That same technology can be used to measure the impact on one cell.
Another idea is to partner with the WSU Smart Sensors and Integrated Microsystems Lab to develop miniature smart sensors. Much later on, Dr. King hopes this research will lead to the construction of a computer model of cellular injures.
Dr. King acknowledges that the full benefits of these investigations may not be realized for more than a decade. For now, the idea is more of a vision than reality. "It's more like trying to find an answer to a question that hasn't been asked yet," Dr. King says. "Our center is externally funded. We have to stay ahead of the game."
Before such research can begin, the Bioengineering Research Center must first invest in sophisticated equipment such as the type that molecular biologists use to study DNA, and bring together people with more than just a molecular biology background. "We have to get our own people upgraded, hire more people in the field, and make use of whatever knowledge is available at the medical school," says Dr. King.
The catalyst for this vision was created recently with the approval of a $1 million grant from the Whitaker Foundation that should pave the way for a permanent Biomedical Engineering Department. With an additional $1 million grant from Wayne State, and about $2.5 million more from industry, the new department can be launched, and accelerate research in the biomedical areas that can make real differences in people's lives.
After 60 years of crash tests and applying blunt force, researchers here are turning to the human cell for answers during the next phase in bioengineering research.
Having nearly completed mapping the human body's tolerance to severe impacts, the researchers are beginning to examine injuries at the cellular level to learn more about how cells are damaged.
"I'm envisioning the day when you can walk away from most car crashes," says Albert King, distinguished professor of Bioengineering, and director of the WSU Bioengineering Center, where research has contributed to the design of safety advancements in seat belts, air bags, interior padding and racing seats.
Severe auto accident victims now end up in the ER instead of the morgue. But in many cases, victims still suffer from debilitating closed head and neck injuries, as well as injuries to the lower limbs. Safety designs have eliminated many acute, but not functional injuries -- damaged limbs, and minor brain damage -- injuries that people can live with, but that affect their quality of life, Dr. King explains.
To gain understanding of functional injuries, Dr. King and WSU researchers plan to study the function of a cell as well as how it is affected and injured upon impact. Then, 10 to 20 years from now, doctors may be able to prevent and better treat injuries to reduce long-lasting effects, he says.
"We want to know how the cell's function is compromised by injury," says Dr. King. "We want to know how a cell is injured, why it dies, and how to make it survive."
The cell membrane controls a lot of the cell's function, including what enters and leaves the cell. Research of that scale requires expertise in the areas of molecular biology, biomechanics, physics, physiology, engineering and medicine. Wayne State investigators from across these disciplines are starting to work together at the Bioengineering Center to study impact bioengineering, and to suggest improvements in vehicle and airplane design, sports equipment and other applications.
The researchers want to analyze the forces that cause long-lasting or permanent damage to the brain. Along those same lines, researchers are also trying to determine where lingering pain comes from following a head and neck injury in a crash. These are the big questions that remain after years of impact injury research. The answers may lead to the reduction of further pain and suffering, not to mention billions of dollars in rehabilitation costs.
With severe impact injuries, secondary injuries, including brain damage, start to set in within hours or a few days of the accident, says C.P. Lee, distinguished professor of biochemistry at the WSU School of Medicine. The injury to the cells may cause changes to their biomedical processes and affect their basic metabolic functions, adds Dr. Lee, who collaborates with Bioengineering Center researchers. Currently, she is researching what goes wrong and how to stop the injury in its tracks before it causes permanent damage.
Once researchers pin down the problem, treating it could be as easy as administering antioxidants and calcium blockers through IVs in the emergency room, she says. Getting antioxidants and calcium blockers into the cells before oxidative stress causes too much damage may reduce the long-term effects of injuries.
"(The research) is very, very promising," Dr. Lee says. She explains that cell damage can be caused by oxidative stress brought on by an overload of calcium ions triggered by a severe impact. The overload can inhibit oxygen transfer within a cell. If the mitochondria, which produce energy in the cell, cannot transfer oxygen effectively, they cannot produce enough energy to maintain the brain or other organs.
Across all disciplines, researchers are working toward the same goal -- finding out how much stress a cell can take, whether the impact causes chemical, mechanical or physiological changes, Dr. King says. The WSU School of Medicine is currently studying programmed cell death, or apoptosis, to figure out how much a cell can take before it is injured so bad that it "commits suicide," Dr. King says. "All we want to know is what it is that causes a cell to go into apoptosis or necrosis, and how the mechanical force causes that to happen."
One way to study impact is to apply a known force or stress level to an individual cell, then analyze the impact on that cell and monitor its function after it has been stretched, Dr. King says. The technology to measure such small forces already exists. One type of sensor currently used in laboratories can measure forces in the order of piconewtons, a unit one-trillionth the size of a newton, the basic unit of force. That sensor measures the force a cell applies to a platform when it moves across the surface. That same technology can be used to measure the impact on one cell.
Another idea is to partner with the WSU Smart Sensors and Integrated Microsystems Lab to develop miniature smart sensors. Much later on, Dr. King hopes this research will lead to the construction of a computer model of cellular injures.
Dr. King acknowledges that the full benefits of these investigations may not be realized for more than a decade. For now, the idea is more of a vision than reality. "It's more like trying to find an answer to a question that hasn't been asked yet," Dr. King says. "Our center is externally funded. We have to stay ahead of the game."
Before such research can begin, the Bioengineering Research Center must first invest in sophisticated equipment such as the type that molecular biologists use to study DNA, and bring together people with more than just a molecular biology background. "We have to get our own people upgraded, hire more people in the field, and make use of whatever knowledge is available at the medical school," says Dr. King.
The catalyst for this vision was created recently with the approval of a $1 million grant from the Whitaker Foundation that should pave the way for a permanent Biomedical Engineering Department. With an additional $1 million grant from Wayne State, and about $2.5 million more from industry, the new department can be launched, and accelerate research in the biomedical areas that can make real differences in people's lives.
Subscribe to:
Posts (Atom)



.jpg)









